7 Tips for Cleaning Up After Interior Painting

May 23, 2018

Cleaning up after the interior painting Toronto project in your home looks like a difficult task. It’s indeed difficult if you don’t know 7 outstanding tips that we will share in this article to make your work easy.

There’s always some method involved in doing things perfectly. Cleaning-up after your interior paint project involves systematic procedure. Read through the below article to make your task easy.

So here are 7 tips for cleaning up after you are done with your interior paint project.

 

1. Cleaning after interior painting

The first step involves removing the painter’s tape. Be careful not to hurry through this step as it might ruin some parts of the paint on your wall. Remove the painters tape with moderate speed. Pullback the tape from the surface over itself.

Hold the tape in such a position so that you’re not more than 12 inches away from the pulling action. However, if the paint has dried up you can use the knife to release the film before pulling it further. As a pro tip, remember to give more time to the paint to dry up if you are living in an area where there is high moisture content in the air.

Image via Pixabay

Image via Pixabay

2. Cleaning up your tools

If you believe in the longevity of the products that you use, you need to clean up the paint tools to extend their usability. If the paint used for interior painting contains water-based or latex paint, you always need to use soap and water for clean-up. However, if the paint used is oil based, you will need to use mineral spirits for cleaning-up.

Image via Pixabay

Image via Pixabay

3. Cleaning of brush thoroughly

To clean the paintbrush thoroughly, you need to use a paint comb. After you clean it, shake it properly so that the extra water is squeezed out of the brush. This action will also help to remove excess water from the brush roller. Keeping your brush dry after cleaning is vital in ensuring that it extends its life and keeps the bristles well in shape.

Image via Pixabay

Image via Pixabay

4. Drying the brush

Never forget to dry the brush by making it hang from its handle on a place where there are ample light and air. By hanging it upside down, you ensure that the brushes metal handle also dry up in the process. This step makes sure that the metal component of your brush doesn’t catch any corrosion due to excess water present in its interiors.

Image via Pixabay

Image via Pixabay

5. Reattaching the components after interior painting

After your interior painting project is over, wait for the paint to fully dry. After that, you can remove the protective covering from the light fixtures and outlet units. Reattach all the items back to their electric circuit so your home can get back normal.

Image via Pixabay

Image via Pixabay

6. Storing the leftovers

When storing the leftover paint inside can make sure that the outer ring is cleaned well before shutting the can. As a pro tip, remember not to let your paint freeze.

You need to store your leftover products in a temperature controlled and dry location.

You can contact your household refuse collection service to take away the empty containers, soiled rags, and unused products but this is rare for anyone to do this. If the paint is dry on any brush or rags it can be thrown away with normal trash (you know, empty cereal boxes, frozen food containers after you have eaten the food, that The Force Awakens and Jurassic World DVD since those movies were really disappointing, and other types of trash which accumulate day after day).

You can dry unused paint quickly in the can using kitty litter.

Image via Pixabay

Image via Pixabay

7. Cleaning up the walls

After you have followed all the steps mentioned in the preceding paragraphs, next is to clean up your walls mildly after 3 to 4 weeks of completing the interior paint project. You can use mild soap and water to clean the walls that have been repainted. Though this is if you have the time and really not necessary. But it can help in some minor way – though how it helps could be imperceptible.

Image via Pixabay

Image via Pixabay

The 6 Amazing Trends in Out Door Protection

May 5, 2018

You may still remember the outdoor intrusion detectors people used to protect their homes before the evolution of video analytics. There were motion detectors and photo beams and other stuff like that. And too much surprise, you will notice that most of these outdoor protection devices and gadgets like driveway motion sensor, are still pretty much in demand and homeowners and business people alike, are now more interested than ever on how they can secure their home and work premises from outside interruptions and even theft or burglary. Outdoor intrusion protection is, in fact, gaining more popular by the day. Here are six trends that will prove to you that the outdoor intrusion protection is increasingly gaining demand from consumers.

  1. Wireless options reduce labor

fairstone-driveway-setts_1_hz

The modern age has seen to it that more of the wireless perimeter protection gadgets being used compared to the wired ones. And even though the wireless outdoor intrusion protection protocols and procedures cost more than the latter, many people still prefer purchasing and using them. And the difference in the cost between the two is shrinking by the day.

People prefer the wireless devices since they require much less labor to be installed and used as well and their sensors can also communicate wirelessly as well. So, you don’t have to worry about the security of your home, even if you are away for work. In case of any alarms, the wireless sensors will communicate to the homeowners wherever they may be on the issues.

  1. Portable outdoor systems

OLYMPUS DIGITAL CAMERA

Companies that manufacture these appliances now offer consumers cellular-capable portable alarm systems that are designed to provide their homes and businesses with outdoor intrusion protection on a temporary basis which is still a pretty big leap in terms of technology.

  1. Video verification had greatly enhanced the accuracy of outdoor systems

SEC0115-cover-slide2_615px

With the inception of video enhancements to outdoor protection systems, the number of false alarms, which were a great issue before has been significantly dealt with by the use of video cameras and CCTV surveillance systems which can capture more clear video recordings even in dim light to avoid occurrences of false alarms again. You are now able to tell whether an alarm is caused by a human intruder or not and in some cases, even able to identify the person intruding.

  1. Alerts are the new tier of protection and not alarms

sensor-bean

Technology advancements have led to dealers now majoring more in sending their consumers alerts whenever any of their outdoor alarms are tripped. Some customers may not be looking to call the police whenever anyone steps into their yard. And the inception of the wireless outdoor passive infrared detectors has done the trick here. Video cameras are now fitted with infrared lights which are able to capture clear images of your outdoor premises even in very dim light. Homeowners can now receive alerts with video clips of the events occurring in their outdoors if any that needs attention.

  1. Creative solutions for the copper thefts

sensores-infrarojos-1

You can now find long-range wireless transmitters that can relay power and monitor outdoor perimeters that are quite far from the receivers. Sirens and alarms have also been embedded in most systems which can scare away any thieves or burglars.

  1. Animal alerts

maxresdefault

In cases where you want to get alerts caused by animals, there are outdoor intrusion alarms just for that as well. You can install outdoor intrusion alarms specifically for large animals like moose or deer.

There are many different types of outdoor intrusion protection systems in the market currently and you need to know exactly what you want and how you want it to serve you before you get up and head to the store to purchase one for yourself.

5 Simple DIY Roof Repair Tips

May 4, 2018

With the evolution of technology to what it has become today and the ever-changing world, most people have now resorted to the DIY way of handling most of the broken stuff in their homes or workplaces that they can handle. The rule is quite simple nowadays; if you can DIY it and have the necessary tools and manuals to do it, then go ahead and do just that. DIY roofing Toronto has also become more popular among homeowners.

And roof repairs are not left behind here either. There are many factors that can affect the integrity of your home and its ability to properly protect you while in your house. Some of these factors include harsh weather conditions, pest attacks, and sometimes even attacks from plants like molds, and algae. Any or all of these factors can be sure cause to have your roof repaired and maybe you are looking to save that extra cash you will need to hire professional roofers to do the job. And if you feel you can DIY your roof repairs and have the capacity to do so, then why not just go ahead and do it? Here are five basic tips you need to have in mind while you DIY your roof repairs.

  1. Locate the source of the leak

Consider-for-Roof-Repair

This may be easier said than done. Sometimes the source of leakages can be more difficult to spot, especially when the source of the leak is all the way at the topmost end of the roof and the water drips and flows through and on the walls. Signs of leakages are usually not that hard to spot with stained water ceilings or moss on the ceilings. You can use a ladder to check to see if there are any cracked, curled or missing roof shingles. Sometimes, leaks are found in the spots where the shingles butt or the flashing and caulking have been damaged. You can also check around your chimney for signs of any loose materials and around the chimney vents and pipes.

  1. Flatten curled shingles

100_0642

You should also be on the lookout for any curled shingles on your roof and flatten them by applying Sulphur roofing cement on them using a brush. You can also use other adhesive compounds to hold down the corners and edges of the shingles to ensure that they never lift up again after flattening them.

  1. Replace any rotten, damages, or missing shingles

shingle-roof-repair-218

Whenever you are doing your roof inspections and notice any rotten, damages, or missing shingles, it is vital that you replace them immediately. Then ensure you fasten the replaced shingles using galvanized roofing nails to make sure they stick.

  1. Reseal chimney and dormers

3535958_original

You can use roofing cement and a caulking gun to stop and seal any leakages around your chimneys and sometimes the dormers. Ensure you reseal any openings and cracks in the joints of your roof’s metal flashing as well.

  1. Remove the old roof

old-roof3

In some instances, you may realize that the roof has been damaged far worse and repairs just won’t cut it. You realize that you need to have the whole roof removed and another roofing system installed. Ensure that you know exactly what you are doing here and have read all the necessary manuals to get through the whole step successfully.

Do You Know These Interesting Facts About Futon and Futon Covers?

May 2, 2018

Among some of the most intriguing facts most people around the globe don’t know or have very little clue about is the Japanese futon mattresses and covers. Believe it or not, there are some pretty interesting facts about futon covers Canada and mattresses you may be very interested to know about. Well, for one, these covers and mattresses are soft and cozy to lie on. Wait till you get a hold of one and you will definitely know what this article is talking about.

Most Japanese have developed this culture of sleeping on the floors, no beds, with nothing but their futon mattresses and covers. Here are some quite interesting facts about futons and futon covers you may be interested to know before you jump right in to purchase one for yourself.

  1. Their origin

Futon-Covers-Target-Ideas

Futons originated from Japan. And the name futon is their native traditional name of calling these padded mattresses that are quilted with textile and sometimes pillows which the Japanese use as their primary beds.

  1. Their materials

env_denim_indigo_ft

These futons are fitted with soft materials, wool, cotton, and synthetic batting which are all very comfortable for resting and even sleeping. You will not even be able to tell the difference between a futon and a regular bed. In fact, you may end up liking the futon better due to its high levels of soft and coziness. They are usually accompanied by padded futon mattresses and quilted blankets or comforters.

  1. More space

catpage-maine-frame-ii

With a futon your place, you are guaranteed of more space than with a regular bed. Other than their softness and comfort, these products also keep your room more spacious and lively especially the bedrooms. You can now have more room which you can use for any other purpose.

Imagine this, you can use it as a bed at night and as a couch during the day. Futons have adjustable frames which allow all this to be possible. You can adjust them to a reclining position.

  1. Other compositions

rustic-futon-covers

The Western-style futons are made with several more of layers of batting and foam to improve more on their softness and coziness too. These extra add-ons make these Western-styled futons look much bigger, larger and thicker than the one you will find in the Japanese culture. These futon covers are lovely and are more decorated and used to make the mattresses look cleaner. They are usually available in different colors so you can buy one according to you your style, and color. Futon covers will also definitely keep your mattresses durable for a lot longer.

  1. Used worldwide

Versailles

Enough research might have already made this point out clear enough to you. The futon covers are now known and used throughout the world with many people now preferring to use futons and futon covers in place of beds. They are much more comfortable and easy to maintain. Not to mention the matter of space as mentioned earlier.

It is only right that you get home to some nice warm soft and cozy futon after a long day’s work and with a good futon mattress cover to go with it.

Get Answers To These 5 Questions Before Hiring a Roofer

Jun 8, 2016

Before hiring a roofing Toronto company, the homeowner must get answers to these questions. Doing so will save time, money and headaches.

Is there a builder’s lien release in the contract?

When a roofer takes on a job, he will likely be running up a bill from a supplier as he draws material for the job. This arrangement allows the roofing company to secure all the material he needs to complete the job. It’s done this way because the homeowner usually doesn’t pay the roofer first. The roofer gets paid after the job is completed. The supplier also expects to be paid when the job is done.

If the supplier doesn’t get paid, state laws allow him to file a builders’ or mechanics’ lien against the homeowner. This means that the supplier can legally hold the homeowner liable for the material used on the job. This lien is a statuary charge against real property by a supplier who contributed goods for the improvement of that property. The builders’ lien has been around since the time of the Roman Empire, and all courts recognize this legal concept.

To avoid a builders’ lien, homeowners must be certain that a builders’ lien release is written into the contract before the first roofing nail goes in. This release takes the homeowner off the hook by ensuring the supplier is paid.

Are you insured?

Insurance is critical in case a worker gets injured on the job. An injured worker can sue the homeowner for medical expenses and lost wages. Be certain that the roofing contractor carries the correct insurance to cover accidents and mishaps.

Who secures the building permits?

This is normally the job of the roofing company. All the proper building permits must be paid for and certified before the job begins. Failing to do so can result in fines against the homeowner. In addition, the county or city inspector can stop all work until the proper permits are displayed. This can be an incredible hassle if winter or the rainy season is coming on and the work is stopped. This matter of building permits and who must secure them must be clearly stated in the contract.

Are the materials and labor guaranteed?

In most cases, the manufacturer of the roofing material will warranty this material. The warranty might be for 15, 20 or 30 years. The homeowner should also ask for a warranty on labor. The labor warranty will be negotiated between the roofing contractor and the homeowner. This is a good practice in the event of some material failing. Fixing a cracked joist is not within the skill of most homeowners.

How long will the job take?

A start date and an estimated completion date should be in the contract. The homeowner should be aware that the contractor may have several jobs going on simultaneously. If a job at another site is stopped because materials are not available, the roofer may pull the crew off the homeowner’s job to complete a prior commitment when those goods arrive. A completion date will act as incentive that the job will be completed in time.

By getting answers to these questions from a roofing contractor, the homeowner will be assured of a professional job that’s done well, on time and at a competitive price.