With the evolution of technology to what it has become today and the ever-changing world, most people have now resorted to the DIY way of handling most of the broken stuff in their homes or workplaces that they can handle. The rule is quite simple nowadays; if you can DIY it and have the necessary tools and manuals to do it, then go ahead and do just that. DIY roofing Toronto has also become more popular among homeowners.
And roof repairs are not left behind here either. There are many factors that can affect the integrity of your home and its ability to properly protect you while in your house. Some of these factors include harsh weather conditions, pest attacks, and sometimes even attacks from plants like molds, and algae. Any or all of these factors can be sure cause to have your roof repaired and maybe you are looking to save that extra cash you will need to hire professional roofers to do the job. And if you feel you can DIY your roof repairs and have the capacity to do so, then why not just go ahead and do it? Here are five basic tips you need to have in mind while you DIY your roof repairs.
- Locate the source of the leak
This may be easier said than done. Sometimes the source of leakages can be more difficult to spot, especially when the source of the leak is all the way at the topmost end of the roof and the water drips and flows through and on the walls. Signs of leakages are usually not that hard to spot with stained water ceilings or moss on the ceilings. You can use a ladder to check to see if there are any cracked, curled or missing roof shingles. Sometimes, leaks are found in the spots where the shingles butt or the flashing and caulking have been damaged. You can also check around your chimney for signs of any loose materials and around the chimney vents and pipes.
- Flatten curled shingles
You should also be on the lookout for any curled shingles on your roof and flatten them by applying Sulphur roofing cement on them using a brush. You can also use other adhesive compounds to hold down the corners and edges of the shingles to ensure that they never lift up again after flattening them.
- Replace any rotten, damages, or missing shingles
Whenever you are doing your roof inspections and notice any rotten, damages, or missing shingles, it is vital that you replace them immediately. Then ensure you fasten the replaced shingles using galvanized roofing nails to make sure they stick.
- Reseal chimney and dormers
You can use roofing cement and a caulking gun to stop and seal any leakages around your chimneys and sometimes the dormers. Ensure you reseal any openings and cracks in the joints of your roof’s metal flashing as well.
- Remove the old roof
In some instances, you may realize that the roof has been damaged far worse and repairs just won’t cut it. You realize that you need to have the whole roof removed and another roofing system installed. Ensure that you know exactly what you are doing here and have read all the necessary manuals to get through the whole step successfully.